142. At what level do we assign inventory procedures Warehouse number Storage location Storage bin Storage type level.
141. How are the diferences handled in the system? They are posted in IM first they are posted in WM first they are finally posted in IM to correct the stock They are finally posted in WM to correct the stock.
143. Which storage types are used for inventory differences? GR area GI area storage bin storage type 999.
145. What are the features of zero stock check? Takes place during first putaway Takes place during stock removal the results are not recorded at storage bin master data level and at quant level If during stock removal, the bin should be emptied but there still stock, the processor will enter the same in the confirmation process and the same is later posted as an inventory difference.
146. How can we ensure that the stock is always available in the picking area? Implementing a replenishment strategy in MM with automatic HU creation Implementing a replenishment strategy in MM with control cycle and production supply area Implementing a replenishment strategy in MM with active availability check Implementing a replenishment strategy in WM with automatic TO creation.
151. what are the features of Storage Unit management? SU is an object used in WM and MM SU is a composition of one or more material quantities that can be managed as a unit in the warehouse Inventory of pallets or containers can only be done using HU management Storage unit can only be homogenous Each SU have a unique number.
156. How to prevent pallets from being forgotten in bulk storage with Storage Unit Management? A storage bin can be blocked after the first stock removal and the same is removed automatically when the storage bin is empty A storage bin can be blocked before the first stock removal and the same is removed automatically when the storage bin is full A storage bin can be blocked for putaway once a certain period has passed after the first putaway and this blocks must be removed manually If we set time limit block, we can especify a reason that is saved in the bin master record. the system removes the block when the last stock removal takes place, as long as the blocking reason is same as the blocking reason in customizing.
157. What are key points when using Storage Units managed in bulk storage? It allows mixed storage in SUs or in bins with non-mixed SUs during removal the system proposes the Storage Unit during removal the system proposes the bins the Storage Unit is specified during confirmation.
158. What are the features of Handling Unit management? It consists of material to be packed and packaging material and is identified by a unique number It can only be used in the delivery process Each HU has a history, a cross process and a chronological documentation of all its movements The HU identification number can be unique within a client or across systems.
159. Your organization is using Serial Shipping Container Code (SCCC) for HU identification. What are its features? Its used to uniquely identify the HU at client level It complies with the coding conventions of European article number GS1-128 Its an 18 digit number used to identify logistics Units Its a 16 digit number used to identify logistics Units Its used to identify a package uniquely for at least one year, worldwide.
169. What are RF monitor features? It displays the assignment of TOs to the queues this assignment is based upon the transfer type and the source and destination data in the TO We can only forward TOs from one queue to another No TOs can be placed before a TO with priority 1.
175. How does the system distribute documents between the SAP ERP and Decentralized WMS? tRFC connection IDocs RF CIF.
176. What are the steps for physical inventory process available in WM?
i. Storage bins are blocked
ii. Print warehouse inventory list
iii. Activate physical inventory document
iv. Create physical inventory document
v. Count, wigh, measure, estimate
vi. release storage bins
vii. Enter physical inventory count
viii. Clear differences in IM
ix. Clear differences in WM iv - iii - i - ii - v - vii - ix - vi - viii i - ii - iii - iv - v - vii - ix - vi - viii iv - ii - i - iii - vi - vii - ix - v - viii ii - iii - ii - ii - viii - vii - ix - vi - v iv - iii - i - ii - v - vii - viii - ix - vi.
178. wich of the following statement correct about storage bin master record? Storage bins are always created within a storage section It is possible to assign a picking area and, if necessary, a fire-containment section for hazardous good management Storage bins are identified by a number up to 12 characters Storage bins can be assigned to a storage type.
179. Your organization does not want to use "addition to existing stock" for storage bin. Which of the following is the best reason for this? It allows addition to existing stock It will allow the material of same type if the quant criteria are same It causes the storage bin to be loaded with more materials The goods receipt date of the quant being added is lost when the quants are merged. This means that the quant will refer to the goods receipt date of the first putaway.
180. Your organization is quite keen to use mixed storage for the storage type. what do you think are the reasons for the same? It allows storage of more than one quant in a storage bin There are several capacity check procedures available for storage type and putaway strategies to ensure that storage bins are not overloaded when there is mixed storage Several batches of same materials cannot be stored in one storage bin All the options.
181. what are the features of dynamic storage bins? The system generates this storage bins depending on the activity They are one of the variant of permanent storage bins They are created in the basis of the document number in order to identify the activity The requirement type decides on the document used to construct the coordinates.
182. What are the features of inmediate transfer order creation? The system creates the document directly after the previous posting During a goods receipt posting, the system not only creates a transfer requirement, it inmediately creates a TO as a subsequent document as well It can be used if it is necessary that no delay is present in continuing a process in the warehouse We can make the decision for inmediate TO creation in the IM movement type.
183. Automatic TO creation. What are its features? The system first sets a predefined indicator in the document header of the TO requirement created as a result of movement posting in WM The TOs for the transfer requirements are created by report RLAUTA10, which is scheduled as a regular job Multiple processing of TO creation is not possible It allows us to match the creation of TO to the rhythm of the work in the warehouse.
184. What are the features of direct putaway with a special movement indicator? Some materials are not suited to interim storage in a goods receipt area. They are taken directly to the destination storage bin when they arrive If the destination storage bin is a fixed bin, the special stock indicator can be used to "switch of" WM for these kinds of activities without relinquishing IM at storage bin level The goods receipt posting in IM triggers the creation of a transfer requirement The TO is not required for putaway because the system takes the destination storage type and bin directly from the WM movement type and the material master.
185. What are the features of near picking bin putaway strategy? It is useful if stock removal is usally executed from a fixed bin specified in the material master record If a putaway into the fixed bin is not possible due to insufficient capacity, the system will show an error To use this putaway strategy, we have to give the system a search range for bins near to the fixed bin and also have to make a separate table entry for the storage type search The fixed bin storage type is in first position in the search sequence and the reserve storage type with the "near picking bin strategy" in the last position.
186. You have activated the capacity check based on the maximum weight of the storage bin. What are its features? The system checks both the relevant data in the storage bin master record and the total gross weight of the material to be putaway according to the material master The system only allows one storage unit per storage bin in this storage type To use this check method we have to enter weight data in both the storage bin and material master records The system updates the capacity used and the remaining capacity at storage bin level.
187. Which of the following inspection types are preconfigured in SAP ECC and are also relevant for WM? Inspection on goods receipts for purchase order (inspection type 01) Final Inspection for goods receipts from production (inspection type 04) Inspection for other goods receipts (inspection type 05) All the options.
188. In which putaway strategies do combination of storage bin types and storage unit types plays a decisive role? Fixed bin Open storage Addition to existing stock Pallets Bulk storage.
189. What are the features of stringent FIFO strategy for stock removals? The oldest quant of the material across all the storage types is always proposed It is advisable if we want to remove the oldest quant from the entire Wno. We set *** indicator in the field for the first storage type in the search sequence It is compatible with addition to stock putaway strategy.
190. What are the features of shelf life expiration date strategy for stock removals? It is a variation of the LIFO strategy The criterion for stock removals is expiration date of the quant, not the goods receipt date We activate this by company code in Customizing and setup the check for each separate movement type When a goods movement is posted, the system prompts to enter the date of manufacture and calculates the shelf life espiration date of the material on the basis of the total shelf life The shelf life expiration date update is activated at quant level for a Wno.
191. In which situations negative stocks are permitted in a storage type? negative stocks are permitted for most of the storage types negative stocks are permitted for most interim storage areas They are generate to balance the stock differences for the activity which has been carried out in IM but is still pending in WM They are generate to balance the stock differences for the activity which has been carried out in WM but is still pending in IM.
193. What are the features of outbound delivery monitor? Is used to group Outbound Deliveries according to various criteria, in order to process then together in picking It allows to carry out the remaining steps of the goods issue process from a single screen We can process several ODs together in the OD monitor only by grouping then together We can target specific Outbound Deliveries for subsequent process.
195. What are the options available for delayed update of the stock removal data in the Outbound Delivery during TO confirmation? Update the OD after confirmation a TO item Cumulative update of the OD after confirmation of the last item in the TO Update the OD after confirming the last TO if there was an order split None of the options.
199. During TO creation when do the search for storage bin takes place? Before storage type search After storage type search Before storage section search After storage section search.
|
