You are setting up Dynamics 365 Supply Chain Management for a client.
The client plans to add several items to the Dynamics 365 Supply Chain Management system.
You are required to ensure that the client can configure the items as either company owned or consignment when the client creates the items.
Which two of the following actions should you take?
NOTE: Each correct answer is worth one point. A. You should enable batch dimension. B. You should enable owner dimension. C. You should allocate a moving average costing inventory model. D. You should allocate a standard costing inventory model.
Your company uses a Dynamics 365 Supply Chain Management system.
You have been tasked with configuring an agreement that gives clients a specified discount per unit if they buy a certain amount of a particular item.
The parameters are as follows:
✑ 51 to 100 `" 10 %/unit
✑ 101 and more `" 15 %/unit
You configure a purchase agreement.
Does the action achieve your objective? A. Yes, it does B. No, it does not.
Your company uses a Dynamics 365 Supply Chain Management system.
You have been tasked with configuring an agreement that gives clients a specified discount per unit if they buy a certain amount of a particular item.
The parameters are as follows:
✑ 51 to 100 `" 10 %/unit
✑ 101 and more `" 15 %/unit
You configure a sales agreement.
Does the action achieve your objective? A. Yes, it does B. No, it does not.
Your company uses a Dynamics 365 Supply Chain Management system.
You have been tasked with configuring an agreement that gives clients a specified discount per unit if they buy a certain amount of a particular item.
The parameters are as follows:
✑ 51 to 100 `" 10 %/unit
✑ 101 and more `" 15 %/unit
You configure a trade agreement.
Does the action achieve your objective? A. Yes, it does B. No, it does not.
Your company recently implemented a Dynamics 365 Supply Chain Management system.
You are currently configuring costing methods for items in inventory. You need to make use of a method normally used for items that have a limited shelf life.
Which of the following is the costing method you should use? A. Standard B. FIFO C. Average D. Specific.
SIMULATION -
Your company makes use of a Dynamics 365 Supply Chain Management system. The company has many distribution warehouses across the USA.
You have been tasked with setting up barcodes to allow for scanning. These barcodes will be entered automatically.
Access the Dynamics 365 portal to achieve this goal. Correct Answer: See explanation below.
1. Go to Product information management > Products > Released products.
2. In the list, find and select the desired record.
3. On the Action Pane, select Manage inventory.
4. Select Bar codes.
5. Select New.
6. Mark the selected row that is created in the list below.
7. In the Barcode setup field, enter or select a value.
8. In the Bar code field, enter or select a value.
9. In the Bar code field, type a value.
10.In the Quantity field, enter a number.
11.Select Save.
12.Close the page. 12.Close the page.
During testing of your company's new implementation of the Dynamics 365 Supply Chain Management procurement module, you notice that, when an item is received, transactions aren't posted to the product receipt journal.
You need to resolve this issue.
Which of the following actions should you take on the Item model group setup form? A. You should consider un-checking the Include physical value checkbox. B. You should consider checking the Include physical value checkbox. C. You should consider un-checking the Accrue liability on product receipt checkbox. D. You should consider checking the Accrue liability on product receipt checkbox.
A manufacturing establishment makes use of a Dynamics 365 Supply Chain Management system.
To accelerate setup, they use bill of materials (BOM) templates.
Which of the following is TRUE with regards to template BOMs? (Choose all that apply.) A. You can only apply a single template BOM to a service object. B. You can apply many template BOMs to a service object. C. You can modify or delete lines in a BOM template regardless of whether the template has been associated to a service object, or not D. You can modify or delete lines in a BOM template as long as the template has not been associated to a service object.
Your company makes use of a Dynamics 365 Supply Chain Management system.
After implementing warehouse locations, you are tasked with configuring location directives for inventory movement.
You need to make use of a location directive that allows for the identification of similar items in the warehouse.
Which of the following is the strategy you should use? A. Match packing quantity B. Location aging FIFO C. Location aging LIFO D. Consolidate.
SIMULATION -
Your company's distribution center supplies a large number of retail stores.
After procuring a big shipment of a new line of products, you have been tasked with configuring buyer push functionality so that the product is equally distributed to the retail stores.
You need to create the transfer order.
Access the Dynamics 365 portal to achieve this goal.
1. Click Retail > Common > Replenishment > Buyer's push.
2. Press Ctrl+N or click New, and then, in the Description field, enter a description.
3. In the Site field, select a site, and then in the Warehouse field, select the warehouse to transfer products from.
4. On the Lines FastTab, click Added reference to add a single product to the transfer order, or click Add products to add multiple products.
5. Do one of the following:
6. To specify a total quantity for the transfer orders, enter the quantity in the Additional quantity to push field. The quantity must be less than the quantity in the
Remaining available quantity to push field. The quantity that you enter is distributed proportionately among the products.
7. To manually specify a quantity for each product, enter each quantity in the Pushed quantity column. The quantity must be less than the quantity in the On hand column.
8. On the Warehouse FastTab, select one of the following distribution methods:
9. Replenishment rules ג€" Distribute quantities based on replenishment rules.
10.Location weight ג€" Distribute quantities based on the proportional weights that are assigned to the stores.
11.Fixed quantity for all ג€" Distribute quantities equally among the stores.
12.If you selected Location weight or Fixed quantity for all, you can select a hierarchy of stores in the Replenishment hierarchy field. These are the stores that will receive the transferred products.
13.To distribute the products to only the stores that have the products in their assortments, select the Respect assortments check box.
14.Regardless of the distribution method you select, one transfer order is created for each store.
15.To update quantities, click Calculate quantities.
16.To create the transfer orders, click Create order.
17.To view the orders, on the Warehouse FastTab, select a store in the list, and then click Order. 12.Close the page.
You need to consider the underlined segment to establish whether it is accurate.
A quarantine order that a status of Started, means that the item is not yet in the quarantine warehouse. A. No adjustment required. B. Created C. Reported as finished D. Ended.
You need to consider the underlined segment to establish whether it is accurate.
Inventory adjustment journals allow for adding cost to an item when you add inventory, and then automatically posts the additional cost to be a specific general ledger account. A. No adjustment required. B. Tag counting C. Movement D. Transfer.
Your company makes use of a Dynamics 365 Supply Chain Management system.
You are tasked with amending inventory. Additionally, the existing item posting configuration must be overridden.
You make use of the inventory adjustment journal.
Does the action achieve your objective? A. Yes, it does B. No, it does not.
Your company makes use of a Dynamics 365 Supply Chain Management system.
You are tasked with amending inventory. Additionally, the existing item posting configuration must be overridden.
You make use of the counting journal.
Does the action achieve your objective? A. Yes, it does B. No, it does not.
Your company makes use of a Dynamics 365 Supply Chain Management system.
You are tasked with amending inventory. Additionally, the existing item posting configuration must be overridden.
You make use of the movement journal.
Does the action achieve your objective? A. Yes, it does B. No, it does not.
Your company uses Dynamics 365 Supply Chain Management to manage its warehouse.
Users report that the inventory for several items in the warehouse is inaccurate.
You are required to ensure that users in the warehouse can verify and rectify the on-hand inventory.
Which of the following actions should you take? A. You should implement the production input journal type. B. You should implement the movement journal type. C. You should implement the counting journal type. D. You should implement the item arrival journal type.
A corporation has two subsidiary businesses, set up as separate legal entities. The one business will be purchasing a new item from the other, and has negotiated for a discount for the first six months of the deal.
You are required to make sure that system will apply the discount for the time stipulated.
Which of the following is the type of agreement you should configure? A. Sale Agreement. B. Service Agreement. C. Purchase Agreement. D. Trade Agreement.
Your company makes use of a Dynamics 365 Supply Chain Management system.
You are in the process of configuring royalty agreement. You are currently identifying the royalty agreement ledger accounts.
Which two of the following ledger accounts should be identified? A. Accounts receivable B. Accrual C. Inventory D. Expense.
Your company makes use of a Dynamics 365 Supply Chain Management system.
You are in the process of configuring royalty agreement. You need to make sure that royalty claim is generated every time a sales order is fulfilled.
Which two of the following is the option you should choose for the Cumulate sales by field? A. Invoice B. Fulfilled C. Active D. Shipped.
Your company manages sales projections via Dynamics 365 Sales.
You are creating a customer record for a new customer in Dynamics 365 Supply Chain Management.
You have to make use of a current quote to generate a sales order. You are preparing to define the customer, and create the sales order.
Which of the following is a combination of the actions you should take? A. You should create Customer from Lead, and confirm the quote. B. You should convert Lead to Customer, and confirm the sales order. C. You should create Customer from Lead, and confirm the sales order. D. You should convert Lead to Customer, and confirm the quote.
SIMULATION -
You work for a distribution warehouse that makes use of a Dynamics 365 Supply Chain Management system.
As soon as lines are automatically released to the warehouse, the warehouse completes work.
You want to make sure that waves allow for automatic work creation.
Access the Dynamics 365 portal to achieve this goal.
1. Go to Navigation pane > Modules > Warehouse management > Setup > Waves > Wave templates.
2. Select New.
3. In the Wave template name field, type a value.
4. In the Wave template description field, type a value.
5. In the Site field, enter or select a value
6. In the Warehouse field, enter or select a value.
7. Set the Automate wave creation field to Yes. Select this option to automatically create a wave when a sales order, production order, or kanban is released to the warehouse.
8. Set the Process wave at release to warehouse option to Yes. Select this option to automatically process the wave and create work when a line is released to the warehouse.
9. Set the Automate wave release option to Yes. Select this option to automatically release the wave. The picking work is created and made available on mobile devices.
10.Set the Assign to open waves option to Yes. Lines are assigned to waves based on the query filter for the wave template.
11.Set the Process wave automatically at threshold option to Yes. Select this option to automatically process the wave when its values reach the thresholds for weight, shipment, and lines specified in the Wave thresholds field group. This option is available only if Shipping is selected in the Wave template type field.
12.Set the Automate replenishment work release option to Yes. Select this option to create demand-based replenishment work and release it automatically.
You must add the replenishment wave method to the wave template, and create a replenishment template using the Wave demand type.
13.Use settings in the Default values filed group to assign wave attributes.
14.Expand the Methods section and set the actions taken by the wave template.
15.Select Save.
16.Close the page.
17.Go to Warehouse management > Setup > Warehouse management parameters.
18.Expand the Wave processing section.
19.In the Wave processing batch group field, enter or select a value.
20.Set the Process waves in batch option to Yes.
21.In the Wait for lock (ms) field, enter a number. Enter the time, in milliseconds, that an allocation step will wait for a system resource that is locked by another allocation step. When this time is exceeded, the wave is not processed and an error message is displayed.
22.Select Save.
23.Close the page.
24.Go to Navigation pane > Modules > Production control > Setup > Production control parameters.
25.In the Release to warehouse field, select an option.
26.Close the page. 12.Close the page.
You work for a shipping concern that make use of a Dynamics 365 Supply Chain Management system.
The business makes use of quite a few freight transporters. The cost of the freight is determined by the distance travelled between the source and the destination.
Which two of the following transportation management engines should you include? A. Freight bill type B. Mileage C. Zone D. Rate E. Transit time engine.
You work for a distribution warehouse that makes use of a Dynamics 365 Supply Chain Management system.
After taking in a sizable quantity of stock that has a limited shelf life, you are required to distribute the stock to retail outlets at the earliest opportunity.
You plan to make use of Buyer's push.
Which of the following is the option you should take? A. You should generate a sales order. B. You should generate transfer orders. C. You should generate service agreements. D. You should generate trade agreements.
You have been tasked with configuring inventory cycle counting for a client that makes use of Dynamics 365 Supply Chain Management.
You need to make of a cycle counting method that allows a worker to count items in a warehouse location at any time, without creating cycle counting work.
Which of the following is the option you should use? A. User directed B. Cycle count grouping C. System directed D. Spot cycle counting.
You work for a distribution company that makes use of a Dynamics 365 Supply Chain Management system.
You are responsible for planning. When you notice that planned orders for a specific item is increasing, you plan to track the source of the planned orders and release them according to their demand.
You want to make sure that a unique planned purchase order is created by the master planning batch job for each new demand requirement for the item.
You configure the use of the Per period coverage code as the lot-sizing method.
Does the action achieve your objective? A. Yes, it does B. No, it does not.
You work for a distribution company that makes use of a Dynamics 365 Supply Chain Management system.
You are responsible for planning. When you notice that planned orders for a specific item is increasing, you plan to track the source of the planned orders and release them according to their demand.
You want to make sure that a unique planned purchase order is created by the master planning batch job for each new demand requirement for the item.
You configure the use of the Min/Max coverage code lot-sizing method.
Does the action achieve your objective? A. Yes, it does B. No, it does not.
You work for a distribution company that makes use of a Dynamics 365 Supply Chain Management system.
You are responsible for planning. When you notice that planned orders for a specific item is increasing, you plan to track the source of the planned orders and release them according to their demand.
You want to make sure that a unique planned purchase order is created by the master planning batch job for each new demand requirement for the item.
You configure the use of the Per requirement coverage code lot-sizing method.
Does the action achieve your objective? A. Yes, it does B. No, it does not.
You make use of planning optimization in Dynamics 365 Supply Chain Management, with automatic firming enabled.
As a result of certain planned purchase orders not firming according to plan, inventory planners have to process planned purchase orders manually.
You want to make sure that the planned purchase orders are incorporated in automatic firming.
You access the Records to include FastTab.
Does the action achieve your objective? A. Yes, it does B. No, it does not.
You make use of planning optimization in Dynamics 365 Supply Chain Management, with automatic firming enabled.
As a result of certain planned purchase orders not firming according to plan, inventory planners have to process planned purchase orders manually.
You want to make sure that the planned purchase orders are incorporated in automatic firming.
You configure the Automatic firming time fence (days).
Does the action achieve your objective? A. Yes, it does B. No, it does not.
You make use of planning optimization in Dynamics 365 Supply Chain Management, with automatic firming enabled.
As a result of certain planned purchase orders not firming according to plan, inventory planners have to process planned purchase orders manually.
You want to make sure that the planned purchase orders are incorporated in automatic firming.
You configure the Lead Time.
Does the action achieve your objective? A. Yes, it does B. No, it does not.
SIMULATION -
You work for a manufacturing firm that makes use of a Dynamics 365 Supply Chain Management system.
You have been tasked with making sure that inventory of certain finished good items never reaches critically low levels. You also want production orders to be created automatically when inventory reaches a specific level.
Access the Dynamics 365 portal to achieve this goal. Create a new safety stock journal name
1. In the Navigation pane, go to Master planning > Setup > Safety stock journal names.
2. Click New.
3. In the Name field, type 'Material'.
4. In the Description field, type 'Material'.
5. Close the page.
Create a safety stock journal -
1. In the Navigation pane, go to Master planning > Master planning > Run > Safety stock calculation.
2. Click New.
3. In the Name field, enter or select a value. Select the safety stock journal name that you created, for example, Material.
4. Click Create lines.
5. In the From date field, enter a date.
6. In the To date field, enter a date.
7. Click OK. This will create lines for the dimensions that have inventory transactions. Create a new safety stock journal name
1. In the Navigation pane, go to Master planning > Setup > Safety stock journal names.
2. Click New.
3. In the Name field, type 'Material'.
4. In the Description field, type 'Material'.
5. Close the page.
Create a safety stock journal -
1. In the Navigation pane, go to Master planning > Master planning > Run > Safety stock calculation.
2. Click New.
3. In the Name field, enter or select a value. Select the safety stock journal name that you created, for example, Material.
4. Click Create lines.
5. In the From date field, enter a date.
6. In the To date field, enter a date.
7. Click OK. This will create lines for the dimensions that have inventory transactions.
You are making use of planning optimization in Dynamics 365 Supply Chain Management.
When a planning optimization job, which is configured with the wrong runtime filters, is accidentally triggered from the user interface, you are tasked with fixing the problem.
Which of the following actions should you take? A. You should access the plan history to cancel the job. B. You should access the dialog box to cancel the job. C. You should access the plan history to rectify runtime filters. D. You should access the dialog box to rectify runtime filters.
You work for a distribution company that makes use of a Dynamics 365 Supply Chain Management system.
In an effort to improve the consistency of forecasting data, you plan to employ demand forecasting.
You have to make sure that your strategy allows for planned orders to be created automatically in the master planning process according to the need or end date.
Which of the following actions should you take? A. You should push data into the staging table. B. You should make use of safety stock calculations. C. You should generate a statistical baseline forecast. D. You should make use of demand forecast details.
You work for a distribution company that makes use of a Dynamics 365 Supply Chain Management system.
You are responsible for planning. You want to make use of a planning engine that allows for orders to be firmed automatically according to the order date.
Which of the following is the option you would use? A. Capacity planning B. Production planning C. Planning Optimization D. Master planning.
A company uses Dynamics 365 Supply Chain Management.
The company obtains packaging cartons in metric tons and sells them as individual items. The packaging cartons come in various sizes and are maintained as product variants.
You need to configure unit conversion for the packaging cartons.
What should you do? A. Enable unit of measure conversions in the product master. Configure the standard unit conversion feature in the Organization administration module. B. Disable unit of measure conversions in the product master. Configure the inter-class unit conversion feature in the Organization administration module. C. Enable unit of measure conversions in the product master. Configure the standard unit conversion feature in the released products. D. Enable unit of measure conversions in the product master. Configure the intra-class unit conversion feature in the released products.
A company uses Dynamics 365 Supply Chain Management.
The company obtains packaging cartons in metric tons and sells them as individual items. The packaging cartons come in various sizes and are maintained as product variants.
You need to configure unit conversion for the packaging cartons.
What should you do? A. Enable unit of measure conversions in the product master. Configure the standard unit conversion feature in the Organization administration module. B. Enable unit of measure conversions in the product master. Configure the inter-class unit conversion feature in the released product. C. Enable unit of measure conversions in the product master. Configure the standard unit conversion feature in the released products. D. Enable unit of measure conversions in the product master. Configure the intra-class unit conversion feature in the released product.
|
