Which system function determines which fields are displayed and changed during delivery document processing
Please choose the correct answer Field control Text management Status management Quantity offsetting.
Which standard process is supported in the SAP Extended Warehouse Management (SAP EWM) radio frequency (RF) framework?
There are 2 correct answers to this question.
Goods issue posting Delivery creation Warehouse order confirmation Deconsolidation.
The following attributes are available for wave templates:
There are 2 correct answers to this question.
Wave Bin Release method Wave category Wave Lot.
What document in EWM represents an executable work package?
Choose the correct answer(s).
Transfer order document Warehouse task Warehouse order Inbound delivery document.
Sometimes it is required to include the actual invoice in the shipment when it leaves the warehouse. For a direct outbound delivery, especially for a pickup process where you want the buyer to pay immediately, you might want to issue the invoice before you post the goods issue (which would normally trigger the invoice print). For these cases, you can use the “invoice before goods issue” process to create and print the invoice before the goods issue is posted. Which statements are not correct given below.
There are 2 correct answers to this question.
If you want to print invoices for the contents of a vehicle or transportation unit, EWM triggers the invoice printout in CRM billing or ERP billing by sending the message Print Billing Document. If you want to print invoices for the contents of a vehicle or transportation unit, EWM triggers the invoice printout in CRM billing or ERP billing by sending the message Print Invoice Document. For single requests from EWM, CRM billing or ERP billing directly creates single invoices that you can change For single requests from EWM, CRM billing or ERP billing directly creates single invoices that you cannot change.
What types of EWM data can be displayed using the warehouse monitor?
There are 4 correct answers to this question.
Warehouse product master data Process related data EWM documents EWM storage bin data Alerts.
Which of the following are profiles that can be used to create a WOCR?
There are 4 correct answers to this question.
Item filter Subtotal filter HU storage profile WO sorting Storage Type filter Packing profile.
The Warehouse Cockpit was created as a tool for what EWM application?
Choose the correct answer(s).
Slotting Physical Inventory Labor Management Quality Inspection engine.
In what system is the APO core interface model created to transfer master data?
Choose the correct answer(s).
SAP SCM APO EWM system Either the SAP ERP or the SAP SCM system. SAP ERP.
What organizational units must be assigned to each warehouse product master record?
There are 2 correct answers to this question.
Storage location Plant EWM warehouse number Shipping point Party Entitled to Dispose.
Question:
The RF framework supports the use of bar codes for identification and verification purposes. SAP currently supports which bar code types?
ENA 128 EAN 256 EAN 64 EAN 128.
The PPF consists of the following components:
There are 3 correct answers to this question.
Action item Action Header Action content Action profile Action definition Action list.
You can use the program Generating Storage-Type-Specific Networks to generate storage-type-specific networks for the travel distance calculation in Extended Warehouse Management automatically. On the SAP Easy Access screen, choose Extended Warehouse Management → Settings → Travel Distance Calculation → Generate Network. The edges for the aisles generated in this way have the following properties If there are only storage bins on one side of the aisle, the edges lie half a bin depth away from the aisle Edges can be passed in only one directions The edges start and end outside the aisle (half a bin depth). Edges are only created for aisles that have one storage bin If storage bins are located on both sides of the aisle, the edges are located in the center of the aisle.
As standard procedure, EWM calls SAP BusinessObjects Global Trade Services in the TCD process for each outbound delivery order or each outbound delivery in the supply chain. You can deactivate this call for all outbound delivery orders or for outbound deliveries in Customizing for each document type. The check criterion is the existence of a final ship-to party, meaning EWM only calls SAP BusinessObjects Global Trade Services for a document type if no final ship-to party has been specified. For more information, see Customizing for EWM at given path: Cross-Process Settings→ Planned Cross-Docking → Basic Settings for Transportation Cross-Docking (TCD). Cross-Process Settings→ Cross-Docking (CD) → Planned Cross-Docking → Basic Settings for Transportation Cross-Docking (TCD). Cross-Process Settings→ Planned Cross-Docking → Cross-Docking (CD) → Basic Settings for Transportation Cross-Docking (TCD). Cross-Process Settings→ Planned Cross-Docking → Cross-Docking (CD) → Basic Settings for Transportation Cross-Docking (TCD).
Which sentence is not correct w.r.t Planned shipment Planned shipment can never replaced by a final shipment Then you create a freight document and assign the planned shipments. In EWM a freight document, which groups the planned shipments and automatically creates a TU and/or a vehicle. They can still change with regard to type and size, for example, due to a subsequent delivery split in Extended Warehouse Management.
The following storage parameters can be determined in slotting using the condition technique:
There are 3 correct answers to this question.
Storage type Storage section indicator Bin type Putaway Control Indicator HU type.
System can perform staging area and door determination in the background, you must define determination rules. When doing this, you first specify which values the system is to compare with the values in the delivery.
Which values can be used for the determination of inbound delivery process?
There are 2 correct answers to this question.
Staging area / door determination group Warehouse process type Departure calendar Routes.
You can also create a kit without a VAS order at a work center. You can configure a work center where you also pack in such a way that you can confirm generated kits there. This process is suitable for the following cases
Note: There are 2 correct answers to this question
You do not require detailed documentation of the kitting procedure in EWM You are not performing kitting in one special kitting work center, but at a work center where you cannot packing You require detailed documentation of the kitting procedure in EWM You are not performing kitting in one special kitting work center, but at a work center where you are also packing.
In EWM a warehouse is identified by the: Warehouse complex code Warehouse organization code Warehouse Number StorageType.
Which of the following are examples of inbound process steps?
There are 3 correct answers to this question.
VAS Picking Deconsolidation Sorting Unloading Labeling.
What organizational units must be assigned to each warehouse product master record?
There are 2 correct answers to this question.
Plant Shipping point EWM warehouse number Storage location Party Entitled to Dispose.
In the executed workload process, the planned and executed duration can be compared for which of the following? QI documents Inbound deliveries Warehouse tasks VAS orders Warehouse orders Outbound delivery orders.
The following storage parameters can be determined in slotting using the condition technique: Storage type Putaway Control Indicator Bin type Storage section indicator HU type.
Examples of indirect labor tasks in EWM are:
There are 2 correct answers to this question.
Meetings Loading Putaway Cleaning Picking.
In Warehouse Order Assignment to Queue, When the system creates a warehouse task (WT), it searches for an appropriate queue to assign to it, based on the following WT parameters.
Note: There are 2 correct answers to this question.
Bin Activity Area Yard Access Type Source activity area Destination activity area.
The RF framework supports the use of bar codes for identification and verification purposes. SAP currently supports which bar code types?
Please choose the correct answer
EAN 64 EAN 128 EAN 256 ENA 128.
What organizational unit is used to represent parking spaces, checkpoints and doors.
Choose the correct answer(s).
Material staging area Storage type Storage section Storage bin.
What must you configure to use a new SAP Extended Warehouse Management (SAP EWM) stock type?
There are 2 correct answers to this question.
Stock type determination Warehouse management monitor Non-location-specific stock type Stock type table in Logistics Inventory Management Engine (LIME).
When you generate an EWM inbound delivery manually without a template, meaning without an expected goods receipt. In this case you must make sure that the data in the inbound delivery is validated. From where you can use the standard implementation of Business Add-In (BAdI)? SCWM/EX_EWM_PROD SCWM/FX_EWM_PROD SCEP/EX_ERP_PROD SCWM/EX_ERP_PROD.
If SAP APO, SAP ERP, or EWM can only partially confirm the requested quantities or change the inspection type automatically, EWM displays a dialog box. What information you find?
There are 3 answers correct
Check status, for example Partially Checked Partial quantity Confirmation date/time Available quantity Inspection Error.
What options are available for creating physical inventories in EWM?
There are 2 correct answers to this question.
Storage type specific inventory Product specific physical inventory Fixed bin directed inventory Cycle counting Storage bin specific inventory.
|
