When using WPAD DNS method, which FQDN format do browsers use to query the DNS server? srv_proxy.<local-domain>/wpad.dat srv_tcp.wpad.<local-domain> wpad.<local-domain> proxy.<local-domain>.wpad.
Which of the following static routes will satisfy this requirement on FGT1? (choose two) 172.20.2.0/24 (1/150) via 10.30.3.2, port3 [10/0] 172.20.2.0/24 (25/0) via 10.10.1.2, port1 [5/0] 172.20.2.0/24 (1/0) via 10.10.1.2, port1 [0/0] 172.20.2.0/24 (25/0) via 10.30.3.2, port3 [5/0].
How can you upload logs to FortiAnalyzer or FortiManager?
On a FortiGate with a hard disk, how can you upload logs to FortiAnalyzer or FortiManager? (Choose two.) hourly real time on-demand store-and-upload.
What does the configuration do? Reduces the amount of logs generated by denied traffic. Enforces device detection on all interfaces for 30 minutes. Blocks denied users for 30 minutes. Creates a session for traffic being denied.
What can be the reasons for that?
An administrator observes that the port1 interface cannot be configured with an IP address. What can be the reasons for that? (Choose three.) The interface has been configured for one-arm sniffer. The interface is a member of a virtual wire pair. The operation mode is transparent. The interface is a member of a zone. Captive portal is enabled in the interface.
What information is flushed when the chunk-size value is changed in the config dlp settings? The database for DLP document fingerprinting The supported file types in the DLP filters The archived files and messages The file name patterns in the DLP filters.
Which is the correct description of a hash result as it relates to digital certificates? A unique value used to verify the input data An output value that is used to identify the person or deduce that authored the input data. An obfuscation used to mask the input data. An encrypted output value used to safe-guard the input data.
Why does FortiGate keep TCP sessions in the session table for some seconds even after both sides (client and server) have terminated the session? To remove the NAT operation. To generate logs To finish any inspection operations. To allow for out-of-order packets that could arrive after the FIN/ACK packets.
You have tasked to design a new IPsec deployment with the following criteria:
-There are two HQ sues that all satellite offices must connect to
-The satellite offices do not need to communicate directly with other satellite offices
-No dynamic routing will be used
-The design should minimize the number of tunnels being configured.
Which topology should be used to satisfy all of the requirements? Partial mesh Hub-and-spoke Fully meshed Redundant.
Which of the following statements is true regarding SSL VPN settings for an SSL VPN portal? By default, FortiGate uses WINS servers to resolve names. By default, the SSL VPN portal requires the installation of a client’s certificate. By default, split tunneling is enabled. By default, the admin GUI and SSL VPN portal use the same HTTPS port.
Which of the following will be highlighted based on the input criteria? Policy with ID1. Policies with ID 2 and 3. Policy with ID 5. Policy with ID 4.
An administrator wants to create a policy-based IPsec VPN tunnel betweeb two FortiGate devices. Which configuration steps must be performed on both devices to support this scenario? (Choose three.) Define the phase 1 parameters, without enabling IPsec interface mode Define the phase 2 parameters. Set the phase 2 encapsulation method to transport mode Define at least one firewall policy, with the action set to IPsec. Define a route to the remote network over the IPsec tunnel.
Which of the following statements about NTLM authentication are correct? (Choose two.) It is useful when users log in to DCs that are not monitored by a collector agent. It takes over as the primary authentication method when configured alongside FSSO. Multi-domain environments require DC agents on every domain controller. NTLM-enabled web browsers are required.
View the certificate shown to the exhibit, and then answer the following question: A root CA A person A bridge CA A subordinate CA.
Which of the following is the expected FortiGate behavior regarding these two routes to the same destination? FortiGate will load balance all traffic across both routes. FortiGate will use the port1 route as the primary candidate. FortiGate will route twice as much traffic to the port2 route FortiGate will only activate the port1 route in the routing table.
Which of the following statements about central NAT are true? (Choose two.) IP tool references must be removed from existing firewall policies before enabling central NAT. Central NAT can be enabled or disabled from the CLI only. Source NAT, using central NAT, requires at least one central SNAT policy. Destination NAT, using central NAT, requires a VIP object as the destination address in a firewall.
Why is FortiGate not blocking the test file over FTP download? Deep-inspection must be enabled for FortiGate to fully scan FTP traffic. FortiGate needs to be operating in flow-based inspection mode in order to scan FTP traffic. The FortiSandbox signature database is required to successfully scan FTP traffic. The proxy options profile needs to scan FTP traffic on a non-standard port.
In a high availability (HA) cluster operating in active-active mode, which of the following correctly describes the path taken by the SYN packet of an HTTP session that is offloaded to a secondary FortiGate? Client > primary FortiGate> secondary FortiGate> primary FortiGate> web server. Client > secondary FortiGate> web server. Client >secondary FortiGate> primary FortiGate> web server. Client> primary FortiGate> secondary FortiGate> web server.
An administrator is configuring an Ipsec between site A and siteB. The Remotes Gateway setting in both sites has been configured as Static IP Address. For site A, the local quick mode selector is 192.16.1.0/24 and the remote quick mode selector is 192.16.2.0/24. How must the administrator configure the local quick mode selector for site B? 192.168.3.0/24 192.168.2.0/24 192.168.1.0/24 192.168.0.0/8.
Which of the following are purposes of NAT traversal in IPsec? (Choose two.) To detect intermediary NAT devices in the tunnel path. To dynamically change phase 1 negotiation mode aggressive mode. To encapsulate ESP packets in UDP packets using port 4500. To force a new DH exchange with each phase 2 rekey.
Which of the following statements correctly describes FortiGates route lookup behavior when searching for a suitable gateway? (Choose two) Lookup is done on the first packet from the session originator Lookup is done on the last packet sent from the responder Lookup is done on every packet, regardless of direction Lookup is done on the first reply packet from the responder.
Which one of the following routes is the best candidate route for FGT1 to route traffic from the Workstation to the Web server? 172.16.0.0/16 [50/0] via 10.4.200.2, port2 [5/0] 0.0.0.0/0 [20/0] via 10.4.200.2, port2 10.4.200.0/30 is directly connected, port2 172.16.32.0/24 is directly connected, port1.
A team manager has decided that while some members of the team need access to particular website, the majority of the team does not. Which configuration option is the most effective option to support this request? Implement a web filter category override for the specified website. Implement web filter authentication for the specified website Implement web filter quotas for the specified website. Implement DNS filter for the specified website.
Which statements about the output are correct? (Choose two.) FortiGate received a TCP SYN/ACK packet. The source IP address of the packet was translated to 10.0.1.10. FortiGate routed the packet through port 3. The packet was allowed by the firewall policy with the ID 00007fc0.
Which statements about antivirus scanning mode are true? (Choose two.) In proxy-based inspection mode antivirus buffers the whole file for scarring before sending it to the client. In flow-based inspection mode, you can use the CLI to configure antivirus profiles to use protocol option profiles. In proxy-based inspection mode, if a virus is detected, a replacement message may not be displayed immediately. In quick scan mode, you can configure antivirus profiles to use any of the available signature data bases.
When browsing to an internal web server using a web-mode SSL VPN bookmark, which IP address is used as the source of the HTTP request? remote user’s public IP address The public IP address of the FortiGate device. The remote user’s virtual IP address. The internal IP address of the FortiGate device.
Which of the following statements about backing up logs from the CLI and downloading logs from the GUI are true? (Choose two.) Log downloads from the GUI are limited to the current filter view Log backups from the CLI cannot be restored to another FortiGate. Log backups from the CLI can be configured to upload to FTP as a scheduled time Log downloads from the GUI are stored as LZ4 compressed files.
Which of the following statements about the session diagnostic output is true? The session is in ESTABLISHED state. The session is in LISTEN state. The session is in TIME_WAIT state. The session is in CLOSE_WAIT state.
Which of the following statements about the FSSO collector agent timers is true? The workstation verify interval is used to periodically check of a workstation is still a domain member. The IP address change verify interval monitors the server IP address where the collector agent is installed, and the updates the collector agent configuration if it changes. The user group cache expiry is used to age out the monitored groups. The dead entry timeout interval is used to age out entries with an unverified status.
A FortiGate device has multiple VDOMs. Which statement about an administrator account configured with the default prof_admin profile is true? It can create administrator accounts with access to the same VDOM. It cannot have access to more than one VDOM. It can reset the password for the admin account. It can upgrade the firmware on the FortiGate device.
Which of the following features is supported by web filter in flow-based inspection mode with NGFW mode set to profile-based? FortiGuard Quotas Static URL Search engines Rating option.
Which IP address will be used to source NAT the Internet traffic coming from a workstation with the IP address 10.0.1.10/24? 10.200.1.10 Any available IP address in the WAN (port1) subnet 10.200.1.0/24 10.200.1.1 10.0.1.254.
By default, when logging to disk, when does FortiGate delete logs? 30 days 1 year Never 7 days.
Which of the following statements are correct? (Choose two.) The port3 default route has the highest distance. The port3 default route has the lowest metric. There will be eight routes active in the routing table. The port1 and port2 default routes are active in the routing table.
If traffic matches a DLP filter with the action set to Quarantine IP Address, what action does FortiGate take? It notifies the administrator by sending an email. It provides a DLP block replacement page with a link to download the file. It blocks all future traffic for that IP address for a configured interval. It archives the data for that IP address.
An administrator is running the following sniffer command: diagnose sniffer packet any "host 10.0.2.10" 3
What information will be included in the sniffer output? (Choose three.) IP header Ethernet header Packet payload Application header Interface name.
Based on the configuration shown in the exhibit, what statements about application control behavior are true? (Choose two.) Access to all unknown applications will be allowed. Access to browser-based Social.Media applications will be blocked. Access to mobile social media applications will be blocked. Access to all applications in Social.Media category will be blocked.
HTTP Public Key Pinning (HPKP) can be an obstacle to implementing full SSL inspection. What solutions could resolve this problem? (Choose two.) Enable Allow Invalid SSL Certificates for the relevant security profile. Change web browsers to one that does not support HPKP. Exempt those web sites that use HPKP from full SSL inspection. Install the CA certificate (that is required to verify the web server certificate) stores of users’ computers.
What does this raw log indicate? (Choose two.) FortiGate blocked the traffic. type indicates that a security event was recorded. 10.0.1.20 is the IP address for lavito.tk. policyid indicates that traffic went through the IPS firewall policy.
Which of the following statements are true when using WPAD with the DHCP discovery method? (Choose two.) If the DHCP method fails, browsers will try the DNS method. The browser needs to be preconfigured with the DHCP server’s IP address. The browser sends a DHCPINFORM request to the DHCP server. The DHCP server provides the PAC file for download.
Which statement about the exhibit is true? (Choose two.) Broadcast traffic received in port1-VLAN10 will not be forwarded to port2-VLAN10. port-VLAN1 is the native VLAN for the port1 physical interface. port1-VLAN10 and port2-VLAN10 can be assigned to different VDOMs. Traffic between port1-VLAN1 and port2-VLAN1 is allowed by default.
An administrator is attempting to allow access to https://fortinet.com through a firewall policy that is configured with a web filter and an SSL inspection profile configured for deep inspection. Which of the following are possible actions to eliminate the certificate error generated by deep inspection? (Choose two.) Implement firewall authentication for all users that need access to fortinet.com. Manually install the FortiGate deep inspection certificate as a trusted CA. Configure fortinet.com access to bypass the IPS engine. Configure an SSL-inspection exemption for fortinet.com.
How does FortiGate verify the login credentials of a remote LDAP user? FortiGate regenerates the algorithm based on the login credentials and compares it to the algorithm stored on the LDAP server. FortiGate sends the user-entered credentials to the LDAP server for authentication. FortiGate queries the LDAP server for credentials. FortiGate queries its own database for credentials.
Which action can be applied to each filter in the application control profile? Block, monitor, warning, and quarantine Allow, monitor, block and learn Allow, block, authenticate, and warning Allow, monitor, block, and quarantine.
An administrator has configured a route-based IPsec VPN between two FortiGate devices. Which statement about this IPsec VPN configuration is true? A phase 2 configuration is not required. This VPN cannot be used as part of a hub-and-spoke topology. A virtual IPsec interface is automatically created after the phase 1 configuration is completed. The IPsec firewall policies must be placed at the top of the list.
Which of the following statement about the output is true? The VPN is configured to use pre-shared key authentication. Extended authentication (XAuth) was successful. Remote is the host name of the remote IPsec peer. Phase 1 went down.
If the Issuer and Subject values are the same in a digital certificate, which type of entity was the certificate issued to? A CRL A person A subordinate CA A root CA.
What settings must you configure to ensure FortiGate generates logs for web filter activity on a firewall policy called Full Access? (Choose two.) Enable Event Logging. Enable a web filter security profile on the Full Access firewall policy. Enable Log Allowed Traffic on the Full Access firewall policy. Enable disk logging.
What are the expected actions if traffic matches this IPS sensor? (Choose two.) The sensor will gather a packet log for all matched traffic. The sensor will not block attackers matching the A32S.Botnet signature. The sensor will block all attacks for Windows servers. The sensor will reset all connections that match these signatures.
How can you block or allow to Twitter using a firewall policy? Configure the Destination field as Internet Service objects for Twitter. Configure the Action field as Learn and select Twitter. Configure the Service field as Internet Service objects for Twitter. Configure the Source field as Internet Service objects for Twitter.
Which statements about HA for FortiGate devices are true? (Choose two.) Sessions handled by proxy-based security profiles cannot be synchronized. Virtual clustering can be configured between two FortiGate devices that have multiple VDOMs. HA management interface settings are synchronized between cluster members. Heartbeat interfaces are not required on the primary device.
An administrator is configuring an antivirus profiles on FortiGate and notices that Proxy Options is not listed under Security Profiles on the GUI. What can cause this issue? FortiGate needs to be switched to NGFW mode. Proxy options section is hidden by default and needs to be enabled from the Feature Visibility menu. Proxy options are no longer available starting in FortiOS 5.6. FortiGate is in flow-based inspection mode.
Why is the site www.bing.com being blocked? The web site www.bing.com is categorized by FortiGuard as Malicious Websites. The user has not authenticated with the FortiGate yet. The web server IP address 204.79.197.200 is categorized by FortiGuard as Malicious Websites. The rating for the web site www.bing.com has been locally overridden to a category that is being blocked.
Which of the following statements are best practices for troubleshooting FSSO? (Choose two.) Include the group of guest users in a policy. Extend timeout timers. Guarantee at least 34 Kbps bandwidth between FortiGate and domain controllers. Ensure all firewalls allow the FSSO required ports.
When override is enabled, which of the following shows the process and selection criteria that are used to elect the primary FortiGate in an HA cluster? Connected monitored ports > HA uptime > priority > serial number Priority > Connected monitored ports > HA uptime > serial number Connected monitored ports > priority > HA uptime > serial number HA uptime > priority > Connected monitored ports > serial number.
What should be done next to troubleshoot the problem? Run a sniffer in the web server. Execute another sniffer in the FortiGate, this time with the filter "host 10.0.1.10". Capture the traffic using an external sniffer connected to port1. Execute a debug flow.
Which of the following statements about policy-based IPsec tunnels are true? (Choose two.) They can be configured in both NAT/Route and transparent operation modes. They support L2TP-over-IPsec. They require two firewall policies: one for each directions of traffic flow. They support GRE-over-IPsec.
Which certificate is presented to the employee’s web browser? The web server’s certificate. The user’s personal certificate signed by a private internal CA. A certificate signed by Fortinet_CA_SSL. A certificate signed by Fortinet_CA_Untrusted.
How does the FortiGate handle web proxy traffic coming from the IP address 10.2.1.200 that requires authorization? It always authorizes the traffic without requiring authentication. It drops the traffic. It authenticates the traffic using the authentication scheme SCHEME2. It authenticates the traffic using the authentication scheme SCHEME1.
During the digital verification process, comparing the original and fresh hash results satisfies which security requirement? Authentication. Data integrity. Non-repudiation. Signature verification.
An administration wants to throttle the total volume of SMTP sessions to their email server. Which of the following DoS sensors can be used to achieve this? tcp_port_scan ip_dst_session udp_flood ip_src_session.
Why must you use aggressive mode when a local FortiGate IPSec gateway hosts multiple dialup tunnels? In aggressive mode, the remote peers are able to provide their peer IDs in the first message. FortiGate is able to handle NATed connections only in aggressive mode. FortiClient only supports aggressive mode. Main mode does not support XAuth for user authentication.
Why did the FortiGate drop the packet? The next-hop IP address is unreachable. It failed the RPF check. It matched an explicitly configured firewall policy with the action DENY. It matched the default implicit firewall policy.
Since the change, the new static route is not showing up in the routing table. Given the information provided, which of the following describes the cause of this problem? The new route’s destination subnet overlaps an existing route. The new route’s Distance value should be higher than 10. The Gateway IP address is not in the same subnet as port1. The Priority is 0, which means that this route will remain inactive.
Which configuration objects can be selected for the Source field of a firewall policy? (Choose two.) Firewall service User or user group IP Pool FQDN address.
Which users and user groups are allowed access to the network through captive portal? Users and groups defined in the firewall policy. Only individual users – not groups – defined in the captive portal configuration Groups defined in the captive portal configuration All users.
NGFW mode allows policy-based configuration for most inspection rules. Which security profile’s configuration does not change when you enable policy-based inspection? Web filtering Antivirus Web proxy Application control.
How does FortiGate select the central SNAT policy that is applied to a TCP session? It selects the SNAT policy specified in the configuration of the outgoing interface. It selects the first matching central SNAT policy, reviewing from top to bottom. It selects the central SNAT policy with the lowest priority. It selects the SNAT policy specified in the configuration of the firewall policy that matches the traffic.
Which of the following conditions are required for establishing an IPSec VPN between two FortiGate devices? (Choose two.) If XAuth is enabled as a server in one peer, it must be enabled as a client in the other peer. If the VPN is configured as route-based, there must be at least one firewall policy with the action set to IPSec. If the VPN is configured as DialUp User in one peer, it must be configured as either Static IP Address or Dynamic DNS in the other peer. If the VPN is configured as a policy-based in one peer, it must also be configured as policy-based in the other peer.
Which of the following statements about converse mode are true? (Choose two.) FortiGate stops sending files to FortiSandbox for inspection. FortiGate stops doing RPF checks over incoming packets. Administrators cannot change the configuration. Administrators can access the FortiGate only through the console port.
Why is the administrator getting the error shown in the exhibit? The administrator must first enter the command edit global. The administrator admin does not have the privileges required to configure global settings. The global settings cannot be configured from the root VDOM context. The command config system global does not exist in FortiGate.
Which statements correctly describe transparent mode operation? (Choose three.) All interfaces of the transparent mode FortiGate device must be on different IP subnets. Ethernet packets are forwarded based on destination MAC addresses, not IP addresses. The transparent FortiGate is visible to network hosts in an IP traceroute. It permits inline traffic inspection and firewalling without changing the IP scheme of the network. FortiGate acts as transparent bridge and forwards traffic at Layer 2.
Which of the following statements are correct? (Choose two.) This setup requires at least two firewall policies with the action set to IPsec. Dead peer detection must be disabled to support this type of IPsec setup. The TunnelB route is the primary route for reaching the remote site. The TunnelA route is used only if the TunnelB VPN is down. This is a redundant IPsec setup.
Which one of the following processes is involved in updating IPS from FortiGuard? FortiGate IPS update requests are sent using UDP port 443. Protocol decoder update requests are sent to service.fortiguard.net. IPS signature update requests are sent to update.fortiguard.net. IPS engine updates can only be obtained using push updates.
Which of the following statements about virtual domains (VDOMs) are true? (Choose two.) The root VDOM is the management VDOM by default. A FortiGate device has 64 VDOMs, created by default. Each VDOM maintains its own system time. Each VDOM maintains its own routing table.
When configuring the root FortiGate to communicate with a downstream FortiGate, which settings are required to be configured? (Choose two.) Device detection enabled. Administrative Access: FortiTelemetry. IP/Network Mask. Role: Security Fabric.
What FortiGate components are tested during the hardware test? (Choose three.) Administrative access HA heartbeat CPU Hard disk Network interfaces.
Which of the following services can be inspected by the DLP profile? (Choose three.) NFS FTP IMAP CIFS HTTP-POST.
Which of the following statements describe WMI polling mode for the FSSO collector agent? (Choose two.) The NetSessionEnum function is used to track user logoffs. WMI polling can increase bandwidth usage in large networks. The collector agent uses a Windows API to query DCs for user logins. The collector agent do not need to search any security event logs.
Which statements about DNS filter profiles are true? (Choose two.) They can inspect HTTP traffic. They can redirect blocked requests to a specific portal. They can block DNS requests to known botnet command and control servers. They must be applied in firewall policies with SSL inspection enabled.
An administrator has configured a dialup IPsec VPN with XAuth. Which statement best describes what occurs during this scenario? Phase 1 negotiations will skip preshared key exchange. Only digital certificates will be accepted as an authentication method in phase 1.C Dialup clients must provide a username and password for authentication. Dialup clients must provide their local ID during phase 2 negotiations.
A DHCP server is connected to the VLAN10 interface. A DHCP client is connected to the VLAN5 interface. However, the DHCP client cannot get a dynamic IP address from the DHCP server. What is the cause of the problem? Both interfaces must belong to the same forward domain. The role of the VLAN10 interface must be set to server. Both interfaces must have the same VLAN ID. Both interfaces must be in different VDOMs.
Where must the proxy address be used? As the source in a firewall policy. As the source in a proxy policy. As the destination in a firewall policy. As the destination in a proxy policy.
Which statement is true regarding SSL VPN timers? (Choose two.) Allow to mitigate DoS attacks from partial HTTP requests. SSL VPN settings do not have customizable timers. Disconnect idle SSL VPN users when a firewall policy authentication timeout occurs. Prevent SSL VPN users from being logged out because of high network latency.
Which of the following conditions must be met in order for a web browser to trust a web server certificate signed by a third-party CA? The public key of the web server certificate must be installed on the browser. The web-server certificate must be installed on the browser. The CA certificate that signed the web-server certificate must be installed on the browser. The private key of the CA certificate that signed the browser certificate must be installed on the browser.
When using SD-WAN, how do you configure the next-hop gateway address for a member interface so that FortiGate can forward Internet traffic? It must be configured in a static route using the sdwan virtual interface. It must be provided in the SD-WAN member interface configuration. It must be configured in a policy-route using the sdwan virtual interface. It must be learned automatically through a dynamic routing protocol.
Which of the following route attributes must be equal for static routes to be eligible for equal cost multipath (ECMP) routing? (Choose two.) Priority Metric Distance Cost.
Based on this output, which statements are correct? (Choose two.) The all VDOM is not synchronized between the primary and secondary FortiGate devices. The root VDOM is not synchronized between the primary and secondary FortiGate devices. The global configuration is synchronized between the primary and secondary FortiGate devices. The FortiGate devices have three VDOMs.
Which statement is true regarding the policy ID number of a firewall policy? Defines the order in which rules are processed. Represents the number of objects used in the firewall policy. Required to modify a firewall policy using the CLI. Changes when firewall policies are reordered.
Examine the diagnostic output shown exhibit. Which of the following options is the most likely cause of this issue? NAT port exhaustion High CPU usage High memory usage High session timeout value.
An administrator has configured central DNAT and virtual IPs. Which of the following can be selected in the firewall policy Destination field? A VIP group The mapped IP address object of the VIP object A VIP object An IP pool.
An administrator needs to strengthen the security for SSL VPN access. Which of the following statements are best practices to do so? (Choose three.) Configure split tunneling for content inspection. Configure host restrictions by IP or MAC address. Configure two-factor authentication using security certificates. Configure SSL offloading to a content processor (FortiASIC). Configure a client integrity check (host-check).
Which statement about FortiGuard services for FortiGate is true? The web filtering database is downloaded locally on FortiGate. Antivirus signatures are downloaded locally on FortiGate. FortiGate downloads IPS updates using UDP port 53 or 8888. FortiAnalyzer can be configured as a local FDN to provide antivirus and IPS updates.
What files are sent to FortiSandbox for inspection in flow-based inspection mode? All suspicious files that do not have their hash value in the FortiGuard antivirus signature database. All suspicious files that are above the defined oversize limit value in the protocol options. All suspicious files that match patterns defined in the antivirus profile. All suspicious files that are allowed to be submitted to FortiSandbox in the antivirus profile.
Which statements about a One-to-One IP pool are true? (Choose two.) It is used for destination NAT. It allows the fixed mapping of an internal address range to an external address range. It does not use port address translation. It allows the configuration of ARP replies.
Which of the following FortiGate configuration tasks will create a route in the policy route table? (Choose two.) Static route created with a Named Address object Static route created with an Internet Services object SD-WAN route created for individual member interfaces SD-WAN rule created to route traffic based on link latency.
A company needs to provide SSL VPN access to two user groups. The company also needs to display different welcome messages on the SSL VPN login screen for both user groups.
What is required in the SSL VPN configuration to meet these requirements? Different SSL VPN realms for each group. Two separate SSL VPNs in different interfaces mapping the same ssl.root. Two firewall policies with different captive portals. Different virtual SSL VPN IP addresses for each group.
Examine the IPS sensor and DoS policy configuration shown in the exhibit; then, answer the question below IMAP.Login.Brute.Force SMTP.Login.Brute.Force Location: server Protocol: SMTP ip_src_session.
Which of the following static routes are not mantained in the routing table? (Choose two) Dynamic routes Policy routes ISDB routes Named Address routes.
How do you format the Fortigate flash disk? Load a debug FortiOS image. Select the format boot device option from the BIOS menu. Load the hardware test (HQIP) image. Execute the CLI command execute nformatlogdisk.
A Fortigate is operating in NAT mode, and configured with two virtual LAN (VLAN) subinterfaces added to the same physical interface.
Which statement about the VLAN IDs in this scenario is true? The two VLAN subinterfaces can have the same VLAN ID, only if they have IP addresses in the same subnet. The two VLAN subinterfaces can have the same VLAN ID, only if they have IP addresses in different subnets. The two VLAN subinterfaces can have the same VLAN ID, only if they belong to different VDOMs. The two VLAN subinterfaces must have different VLAN IDs.
Which statements about the firmware upgrade process on an active-active HA cluster are true? (Choose two) Uninterruptable upgrade is enabled by default. The firmware image must be uploaded manually to each Fortigate. Traffic load balancing is temporarily disabled while upgrading the firmware. Only secondary Fortigate devices are rebooted.
What FortiGate configuration is required to actively prompt users for credentials? You must enable one or more protocols that support active authentication on a firewall policy. You must assign users to a group for active authentication. You must place the firewall policy for active authentication before a firewall policy for passive authentication. You must enable the Authentication setting on the firewall policy.
Which of the followmg are valid actions for FortiGuard category based filter in a web filter profile in proxy-based inspection mode?. (Choose two.) Learn Allow Warning Exempt.
Which is a requirement for creating an inter-VDOM link between two VDOMs? The inspection mode of both VDOMs must match. Both VDOMs must operate in NAT mode. At least one of the VDOMs must operate in NAT mode. The inspection mode of at least one VDOM must be proxy-based.
Which statements are true regarding firewall policy NAT using the outgoing interface IP address with fixed port disabled? (Choose two.) This is known as many-to-one NAT. Source IP is translated to the outgoing interface IP Connections are tracked using source port and source MAC address. Port address translation is not used.
Which statements best describe auto discovery VPN (ADVPN)? (Choose two.) It recommends the use of dynamic routing protocols so that spokes can leam the routes to other spokes. ADVPN is supported only with IKEv2. Every spoke requires a static tunnel to be configured to other spokes so that phase 1 and phase 2 proposals are defined in advance. IPSec tunnels are negotiated dynamically between spokes.
If the Services field is configured in a Virtual IP (VIP), which of the Following statements is true when central NAT is used? The Services field removes the requirement of creating multiple VIPs for different services. The Services field is used when several VIPs need to be bundled into VIP groups. The Services field does not allow multiple sources of traffic, to use multiple services, to connect to a single computer. The Services field does not allow source NAT and destination NAT to be combined in the same policy.
An administrator wants to configure a FortiGate as a DNS server. FortiGate must use its DNS database first, and then relay all irresolvable quenes to an external DNS server. Which of the following DNS method must you use? Forward to system DNS Recursive Non-recursive Forward to primary and secondary DNS.
Examine the IPS sensor configuration and forward traffic logs shown in the exhibit; then, answer the question below. The HTTPS signatures have not been added to the sensor. A DoS policy should be used, instead of an IPS sensor. The firewall policy is not using a full SSL inspection profile. The IPS filter is missing the Protocol: HTTPS option.
Examine this PAC file configuration: Any web request sent to the 172.25.120.0/24 subnet is allowed to bypass the proxy. All requests not sent to fortinet. com or the 172.25.120.0/24 subnet have to go through altproxy.corp.com:8060. Browsers can be configured to retrieve this PAC file from the FortiGate. Any web request sent to fortinet. com is allowed to bypass the proxy.
Examine this FortiGate configuration: It is allowed and inspected, as long as the only inspection required is antivirus. It is allowed, but with no inspection. It is allowed and inspected as long as the inspection is flow based. It is dropped.
The FSSO Collector Agent set to advanced access mode for the Windows Active Directory uses which of the following? NTLM convention Windows convention - NetBios: Domain\Usemame LDAP convention RSSO convention.
Which statement about the log message is true? The web site miniclip.com matches a static URL filter whose action is set to Warning. The name of the applied web filter profile is default. The usage quota for the IP address 10.0.1.10 has expired. The action for the category Games is set to block.
Which statement about DLP on FortiGate is true? It can be applied to a firewall policy in a flow-based VDOM. Traffic shaping can be applied to DLP sensors. It can archive files and messagges. Files can be sent to FortiSandbox for detecting DLP threats.
An administrator needs to create an SSL-VPN connection for accessing an internal server using the bookmark Port Forward. What step is required for this configuration? Configure the client application to forward IP traffic through FortiClient. Configure the virtual IP address to be assigned to the SSL VPN users. Configure an SSL VPN realm for clients to use the port forward bookmark. Configure the client application forward IP traffic to a Java applet proxy.
What types of traffic and attacks can be blocked by a web application firewall (WAF) profile? (Choose three.) Traffic to botnet servers Traffic to inappropriate web sites Server information disclosure attacks SQL injection attacks Credit card data leaks.
Which statement about the IP authentication header (AH) used by IPsec is true? AH does not provide any data integrity or encryption. AH provides strong data integrity but weak encryption. AH provides data integrity but no encryption. AH does not support perfect forward secrecy.
View the exhibit. Addicting.Games will be allowed based on the Application Overrides configuration. Addicting.Games will be allowed only if the Filter Overrides action is set to Learn. Addicting.Games will be blocked based on the Filter Overrides configuration Addicting.Games will be allowed based on the Categories configuration.
Examine this network diagram: ‘host 192.168. 0.1 and port 80 ‘ ‘host 192.168.0.2 and port 8080’ ‘host 10.0.0.50 and port 8080’ ‘host 10.0.0.50 and port 80’.
Which statement about the firewall policy authentication timeout is true?
It is a hard timeout. FortiGate removes the temporary policy for a user’s source MAC address after this timer expires. It is an idle timeout. FortiGate considers a user to be idle if it does not see any packets coming from the user’s source IP. It is a hard timeout. FortiGate removes the temporary policy for a user’s source IP address after this timer expires. It is an idle timeout. FortiGate considers a user to be idle if it does not see any packets coming from the user’s source MAC address.
View the exhibit. A static or dynamic route in VDOM2 with the subnet 10.0.1. 0/24 as the destination One firewall policy in VDOM1 with port2 as the source interface and InterVDOM0 as the destination interface A static or dynamic route in VDOM1 with the subnet 10.200.1. 0/24 as the destination One firewall policy in VDOM2 with InterVDOM1 as the source interface and port1 as the destination interface.
Which of the following SD-WAN load-balancing methods use interface weight value to distribute traffic? (Choose two.) Source IP Spillover Sessions Volume.
What is the limitation of using a URL list and application control on the same firewall policy, in NGFW policy-based mode? It limits the scope of application control to scan application traffic using parent signatures only. It limits the scope of application control to scan application traffic on DNS protocol only. It limits the scope of application control to the browser-based technology category only. It limits the scope of application control to scan application traffic based on application category only.
What criteria does FortiGate use to look for a matching firewall policy to process traffic? (Choose two.) Incoming and outgoing interfaces. Services defined in the firewall policy. Lowest to highest policy ID number. Highest to lowest priority defined in the firewall policy.
|
