You are moving managed FortiGate devices from one ADOM to a new ADOM.
Which statement correctly describes the expected result? Anypending device settings will be installed automatically Any unused objects from a previous ADOM are moved to the new ADOM automatically The shared policy package will not be moved to the new ADOM Policy packages will be imported into the new ADOM automatically.
An administrator logs into the FortiManager GUI and sees the panes shown in the exhibit.
Which two reasons can explain why the FortiAnalyzer feature panes do not appear? (Choose two.) The administrator logged in using the unsecure protocol HTTP, so the view is restricted The administrator profile does not have full access privileges like the Super_User profile The administrator IP address is not a part of the trusted hosts configured on FortiManager interfaces. FortiAnalyzer features are not enabled on FortiManager.
What is the purpose of ADOM revisions? To create System Checkpoints for the FortiManager configuration To save the current state of the whole ADOM To save the current state of all policy packages and objects for an ADOM To revert individual policy packages and device-level settings for a managed FortiGate by reverting to a specific ADOM revision.
An administrator’s PC crashes before the administrator can submit a workflow session for approval. After the PC is restarted, the administrator notices that the ADOM was locked from the session before the crash.
How can the administrator unlock the ADOM? Restore the configuration from a previous backup Log in as Super_User in order to unlock the ADOM Log in using the same administrator account to unlock the ADOM Delete the previous admin session manually through the FortiManager GUI or CLI.
What does a policy package status of Conflict indicate? The policy package reports inconsistencies and conflicts during a Policy Consistency Check The policy package does not have a FortiGate as the installation target. The policy package configuration has been changed on both FortiManager and the managed device independently. The policy configuration has never been imported after a device was registered on FortiManage.
An administrator has configured the command shown in the exhibit on FortiManager. A configuration change has been installed from FortiManager to the managed FortiGate that causes the FGFM tunnel to go down for more than 15 minutes.
What is the purpose of this command? It allows FortiGate to unset central management settings It allows FortiGate to reboot and recover the previous configuration from its configuration file It allows the FortiManager to revert and install a previous configuration revision on the managed FortiGate. It allows FortiGate to reboot and restore a previously working firmware image.
Which two statements about Security Fabric integration with FortiManager are true? (Choose two.) The Security Fabric license, group name and password are required for the FortiManager Security Fabric integration The Fabric View module enables you to generate the Security Fabric ratings for Security Fabric devices The Security Fabric settings are part of the device level settings The Fabric View module enables you to view the Security Fabric ratings for Security Fabric devices.
Which two statements are true if the script is executed using the Device Database option? (Choose two.) You must install these changes using the Install Wizard to a managed device The successful execution of a script on the Device Database will create a new revision history The script history will show successful installation of the script on the remote FortiGate The Device Settings Status will be tagged as Modified.
What will be the result of reverting to a previous revision version in the revision history? It will install configuration changes to managed device automatically It will tag the device settings status as Auto-Update It will generate a new version ID and remove all other revision history versions It will modify the device-level database.
Which two settings are required for FortiManager Management Extension Applications (MEA)? (Choose two.) When you configure MEA, you must open TCP or UDP port 540 You must open the ports to the Fortinet registry You must create a MEA special policy on FortiManager using the super user profile The administrator must have the super user profile.
An administrator is in the process of moving the system template profile between ADOMs by running the following command:
execute improfile import-profile ADOM2 3547 /tmp/myfile
Where does the administrator import the file from? File system ADOM1 ADOM2 object database ADOM2.
According to the error message why is FortiManager failing to add the FortiAnalyzer device? The administrator must turn off the Use Legacy Device login and add the FortiAnaJyzer device to the same network as Forti-Manager The administrator must select the Forti-Manager administrative access checkbox on the FortiAnalyzer management interface The administrator must use the Add Model Device section and discover the FortiAnalyzer device The administrator must use the correct user name and password of the FortiAnalyzer device.
Given the configuration shown in the exhibit, how did FortiManager handle the service category named General? FortiManager ignored the firewall service category General but created a new service category in its database FortiManager ignored the firewall service category general and deleted the duplicate value In Its database FortiManager ignored the firewall service category General and updated the FortiGate duplicate value in the FortiGate database FortiManager ignored the firewall service category General and did not update Its database with the value.
An administrator would like to create a policy on the Staging ADOM in backup mode, and install it on the FortiGate device in the same ADOM.
How can the administrator perform this task? The administrator must change the ADOM mode to Advanced to bring the FortiManager online. The administrator must disable the FortiManager offline mode first. The administrator must use the Policy & Objects section to create a policy first.
What is the purpose of the Policy Check feature on FortiManager? It provides recommendations for optimizing policies in a policy package It provides recommendations to combine similar policy packages within an ADOM into one single policy package. It compares the policy packages with the revision history, and updates policy packages in the ADOM database It merges and creates dynamic mappings for duplicate objects used in a policy package.
Which two statements about an ADOM set in Normal mode on Fortitvlanager are true? (Choose two.) It supports the FortiManager script feature. You cannot assign the same ADOM to multiple administrators. FortiManager automatically installs the configuration difference in revisions on the managed FortiGate It allows making configuration changes for managed devices on FortiManager panes.
You are using the Quick Install option to install configuration changes on the managed FortiGate.
Which two statements correctly describe the result? (Choose two.) It installs all the changes in the device database first and the administrator must reinstall the changes on the FortiGate device It provides the option to preview only the policy package changes before installing them. It installs provisioning templates changes on the FortiGate device It installs device-level changes on the FortiGate device without launching the Install Wizard.
An administrator would like to review, approve, or reject all the firewall policy changes made by the junior administrators.
How should the workspace mode settings be configured on FortiManager? Set to read/write and using the policy locking feature Set to normal and using the approval group feature Set to workflow and using the ADOM locking feature Set to workspace and using the policy locking feature.
An administrator configures a new OSPF route on FortiManager and has not yet pushed the changes to the managed FortiGate device.
In which database will the configuration be saved? ADOM-level database Configuration-level database Revision history database Device-level database.
A service provider administrator has assigned a global policy package to a managed customer ADOM named My_ADOM, which has four policy packages. The customer administrator has access only to My_ADOM.
How can customer or service provider administrators remove both global header and footer policies from the policy package named Shared_Package? The service provider administrator can unassign both global policies from My_ADOM The service provider administrator can unassign both policies from the global ADOM The customer administrator can unassign both global polices from My_ADOM The customer administrator can unassign both polices by locking My_ADOM.
Which two statements about the output are true? (Choose two.) The latest revision history for the managed FortiGate does not match the device-level database. Configuration changes have been installed on FortiGate, which means the FortiGate configuration has been changed Configuration changes directly made on FortiGate have been automatically updated to the device-level database The latest revision history for the managed FortiGate does match the FortiGate running configuration.
An administrator has assigned a global policy package to custom ADOM1. Then the administrator creates a new policy package, Fortinet, in the custom ADOM1.
What will happen to the Fortinet policy package? When the Fortinet policy package is created, it automatically assigns the global policies When the Fortinet policy package is created, you can select the option to assign the global policies When the Fortinet policy package is created, you need to reapply the global policy package to the ADOM When the Fortinet policy package is created, you need to assign the global policy package from the global ADOM.
What is the advantage of using FortiManager to manage FortiAnalyzer? It allows FortiManager to act as a collector and FortiAnalyzer device It allows FortiManager to manage all FortiGate devices It allows FortilManager to run reports based on FortiAnalyze It allows FortiManager to store all managed FortiGate device logs.
Which two items are included in the FortiManager backup? (Choose two.) FortiGuard database Firmware images Flash configuration All devices.
An administrator has enabled Service Access on FortiManager.
What is the purpose of Service Access on the FortiManager interface? It allows administrative access to FortiManager It allows FortiManager to respond to requests for FortiGuard services from FortiGate devices It allows FortiManager to determine the connection status of managed devices. It allows third-party applications to gain read/write access to FortiManager.
Given the configuration shown in the exhibit, which two statements are true? (Choose two.) An administrator can also lock the Local-FortiGate-1 policy package The FortiManager ADOM is locked by the administrator The FortiManager ADOM mode is set to Normal FortiManager is in workflow mode.
Which two items does an FGFM keepalive message include? (Choose two.) FortiGate uptime FortiGate license information FortiGate IPS version FortiGate configuration checksum.
An administrator is replacing a failed device on FortiManager by running the following command:
execute device replace sn <devname> <serialnum>
What device name and serial number must the administrator use? The device name of the new device and serial number of the failed device The device name and serial number of the new device The device name and serial number of the failed device The device name of the failed device and serial number of the new device.
Review the Download Import Report.
Why is it failing to import firewall policy ID 1? Policy ID 1 for this managed FortiGate already exists on FortiManager in the policy package named Remote-FortiGate. Policy ID 1 is configured from the interface any to port6. FortiManager rejects the request to import this policy because the any interface does not exist on FortiManager Policy ID 1 does not have the ADOM Interface mapping configured on FortiManager The address object used in policy ID 1 already exists in the ADOM database with any as the interface association, and conflicts with the address object interface association locally on FortiGate.
Given the configuration shown in the exhibit, what are two results from this configuration? (Choose two.) Two or more administrators can make configuration changes at the same time, in the same ADOM Concurrent read-write access to an ADOM is disabled. You can validate administrator login attempts through external servers The same administrator can lock more than one ADOM at the same time.
What is the purpose of setting ADOM Mode to Advanced? This setting enables the ADOMs feature on FortiManager This setting allows you to assign a VDOM when offline mode is enabled This setting disables concurrent ADOM access and adds ADOM locking This setting allows you to assign a VDOM from a single device to a different ADOM.
An administrator has created a firewall address object that is used in multiple policy packages for multiple FortiGate devices in an ADOM.
After the installation operation is performed, which IP/netmask will be shown on FortiManager for this firewall address object? The FortiManager replaces the address object to none 192.168.1.0/24 0.0.0.0/0 10.0.5.0/24.
An administrator is about to add the FortiGate device to FortiManager using the discovery process.
FortiManager is operating behind a NAT device, and the administrator configured the FortiManager NATed IP address under the FortiManager system administration settings.
What is the expected result? During discovery, FortiManager sets both the FortiManager NATed IP address and NAT device IP address on FortiGate During discovery, FortiManager uses only the FortiGate serial number to establish the connection During discovery, FortiManager sets the FortiManager NATed IP address on FortiGate During discovery, FortiManager sets the NATed device IP address on FortiGate.
In the event that one of the secondary FortiManager devices fails, which action must be performed to return the FortiManager HA to a working state? Manually promote one of the working secondary devices to the primary role, and reboot the old primary device to remove the peer IP of the failed device. The FortiManager HA state transition is transparent to administrators and does not require any reconfiguration Reconfigure the primary device to remove the peer IP of the failed device Reboot the failed device to remove its IP from the primary device.
An administrator is tasked with troubleshooting an issue with push updates failing on a FortiManager device that is located behind a NAT device.
Which two settings should the administrator check? (Choose two.) That the virtual IP address and correct ports are set on the NAT device That the NAT device IP address and correct ports are configured on FortiManager That the external IP address on the NAT device is set to DHCP and configured with the virtual IP That the override server IP address is set on FortiManager and the NAT device.
An administrator enabled workspace mode and now wants to delete an address object that is currently referenced in a firewall policy.
What can the administrator expect to happen? FortiManager will replace the deleted address object with the none address object in the referenced firewall policy. FortiManager will not allow the administrator to delete a referenced address object until the ADOM is locked FortiManager will leave the address object empty. FortiManager will temporary disable the status of the referenced firewall policy.
What can you conclude from the failed installation log shown in the exhibit? Policy ID 2 is installed without the remote user student. Policy ID 2 is installed without a source address. Policy ID 2 is installed in the disabled state Policy ID 2 will not be installed.
A junior administrator is troubleshooting a FortiManager connectivity issue that is accurring whit managed FortiGate devices.
Given the FortiManager device manager settings shown in the exhibit, what can you conclude from the exhibit? The administrator had restored the FortiManager configuration file. The administrator can reclain the FGFM tunnel to get both devices online. FortiManager lost internet connectivity, thus, tunnel devices appear to be down. The administrator must refresh both devices to restore connectivity.
Which three settings are the factory settings on FortiManager? (choose three) Management Extension Applications are enable The FortiManager setup wizard is disabled port1 interface ip address is 192.168.1.99/24 FortiAnalyzer features are disabled. The administrative domain is disabled.
What does a policy package status os never installed indicate? FortiManager is unable to determine the policy package status. The policy configuration has been changed on a managed device and changes have no yet been imported into FortiManager. The policy configuration has been changed on FortiManager and changes have not yet been installed on the managed device. The policy package has never imported after a device was registered on FortiManager.
An administrator would like to create three ADOMs on FortiManager with different access levels based on departments.
What can you comclude from the desing shown in exhibit? (choose two) Admin a can access vdom2 and vdom3 with the super profile The administrator must configure FortiManager in workspace The FortiManager policies and objects database can be shared between the Financial and HR ADOMs. The administrator must set the FortiManager ADOM mode to advanced.
An administrator created a header and footer global policy package and assigned it to an ADOM.
What are two outcomes from this action? (choose two) If you assigned an additional global policy package to the same ADOM, FortiManager removes previously assigned polices. After you assigned the global policy package to an ADOM, the policy package is hidden from the ADOM and cannot view. You can edit or delete all the global objects in the global ADOM. You must manually move the header and footer polices after the policy assignment.
|
